Partsam 440lbs Automatic Lift Electric Cable Hoist with Wireless Remote Control 120V Overhead Crane Garage Ceiling Pulley Winch w Towing Strap Sling, Electric Wire Rope Hoist, 38ft Lifting Height

Everything worked well.

I installed the control wired hoist in my garage; my daughters garage has a 17 foot clearance so I built 2 mezzanines in her garage and installed the remote control hoist; I like both but the remote is a must for tall ceilings and it works very well; it was simple to do the initial code and connect. After my 1st install experience, I changed my installation and saved money; the unistrut connection fittings and other ancillary items can add up quickly to a significant amount. I installed Home Depots ten foot 12 gauge superstrut ($36) to the rafters, drilled individual holes into the superstrut using eight SPAX T30 plus star head, grade 5 screws (#14 x 3.5"), one per every rafter span (8 total). I drilled the initial hole small, large enough to insert the screw and then, using a slightly larger drill bit, I very carefully drilled a slightly more to V shape each hole (CAREFULLY LEAVING ENOUGH REMAINING METAL) and then installed the T star screws with their heads 'nearly flush' to the metal track, without this 2nd slight drilling, tje top of the steel trolley wheels will bump or 'nick' against the top of the screw head(s).I ordered (from Amazon) a pair of RH King 4- steel wheel roller trolleys ($81/pair), the superstrut from HD, and spent approx $10 for the SPAX screws (bx of 10 from Home Depot). (Note: any screw used should be grade 5). I also ordered (via Amazon) the Mophorn Cargo Net with hooks ($43). I inserted two 3/8 x 2 grade 5 bolts as stoppers, one at each end of the superstrut track to stopthe trolley, installing them with two nuts/ea (& used loctite) using the/through the existing superstrut top oval slot(s) and installing them in the space between the rafters (one somewhere at each end of the track). Installing them in the rafter spacing allows the superstrut track to be installed flush against each rafter and not losing any 'lift' overhead space. Take care when making the V shape drill-cut (the 2nd add'l drilling for each hole...drill just enough to allow the screw heads to protrude slightly but leave enough remaining strut metal for safe anchorage to the rafter. I added construction adhesive to each screw threaded end before installation. I estimate any lost strength in the strut metal is regained bythe increased number of screws securing the track to the rafters. The steel trolleyruns freely back and forth for 10', across the length of the garage. While the hoist can lift 440 lb, we limit our loads to under 200 lbs for margin of safety. (And never stand underneath a load when hoisting!) She mainly stores large totes with various Holiday decorations up on the mezzanines...plus sleds, bikes, camping gear, snow skis, etc. I am doing a bathroom renovation and storing the tub, sink, shower doors, toilets, vanity, etc. up on the mezz, lifting them down when needed. The toilet in the photo weighs 90 lbs.

Used it all season for possessing deer in my shop, I did have to do alittle redneck engineering using strut and all thread so that I could mount it where I wanted, all in all I am very pleased with this hoist.

Love it.why didn't I do this b4

Very easy to install. Installed in my garage to remove my Jeep��s hardtop. Works great! I like having the remote. Having the remote is worth the extra money. Would recommend.

Small but very Strong lifter, Easy to install ,quick painting free cable remote control